欢迎来到苏州艾特森制药设备有限公司网站!
咨询热线

18118481917

当前位置:首页  >  产品中心  >  灭菌设备  >  无菌换热器  >  HPEx-L1无菌换热器

无菌换热器

简要描述:无菌换热器是热流体的部分热量传递给冷流体的设备,又称为热交换器。列管式换热器由壳体、管束、管板、折流挡板和封头组成。

  • 产品型号:HPEx-L1
  • 厂商性质:生产厂家
  • 更新时间:2024-09-02
  • 访  问  量: 3697

详细介绍

无菌换热器

Aseptic Heat Exchanger 

基本原理

Basic Principles

换热器是热流体的部分热量传递给冷流体的设备,又称为热交换器。列管式换热器由壳体、管束、管板、折流挡板和封头组成。换热器中流体的相对流向一般有顺流和逆流两种。顺流时,入口处两流体的温差大,并沿传热表面逐渐减小。逆流时,沿传热表两流体的温差分布较均匀

Heat exchanger is a device that transfers part of heat from hot fluid to cold fluid, also known as heat exchanger. The tubular heat exchanger consists of shell, tube bundle, tube plate, baffle and head. The relative flow direction of fluid in heat exchanger generally has two kinds: downstream and countercurrent. The temperature difference between the two fluids at the inlet is the largest and decreases along the heat transfer surface. The temperature difference distribution of two fluids along the heat transfer meter is more uniform when countercurrent occurs.  

 

无菌换热器基本参数

Basic Parameters  

 

性能及结构

Performance And Structure 

◆大工作压力:管程150bar,壳程150bar

Maximum working pressure: 150bar in pipe and 150bar in shell 

◆允许温差:热流体平均温度与冷流体平均温度差≤70℃

Permissible temperature difference: the difference between the average temperature of hot and cold fluids is less than 70℃ 

◆材质:304/304L, 316/316L, 2205, 2507, S31254, C276,钛材,坦材等

Material: 304/304L, 316/316L, 2205, 2507, S31254, C276, Titanium, Tan, etc 

◆抛光要求:MP或EP,Ra≤0.4μm

Polishing requirements: MP or EP, Ra≤0.4μm 

◆可实现CIP在线清洗和SIP在线灭菌

CIP online cleaning and SIP online sterilization can be realized 

◆符合GMPFDA要求

It meets the requirements of GMP/FDA 

应用

Application 

◆艾特森系列无菌U型单/双管板换热器可广泛应用于民用、石油、化工、电力、医药、食品等行业,可用于加热、冷却、蒸发、冷凝、余热回收等各种情况

Aitesen series sterile U-tube exchangers can be widely used in civil, petroleum, chemical, power, medicine, food and other industries, and can be used in heating, cooling, evaporation, condensation, waste heat recovery and other situations 

◆选用双管板换热器,可防止加热冷却介质之间的交叉污染

Double tube-plate heat exchanger can prevent cross-contamination between heating and cooling media 

◆可根据用户要求进行非标定制

Non-standard customization can be made according to user’s requirements

 

 

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7